Controls that should be done in the production of flame retardant with alumina powder
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2018-02-10
- Views:25
(Summary description)When using alumina to make flame retardants, not only the environment must meet the production requirements, but also other aspects must be controlled, so that better products can be made smoothly.
1. If clips are used in the process of making flame retardant with alumina powder, it is best to use strong acid and alkali resistant PP all plastic clips to avoid pollution caused by corrosion and oxidation of the clips.
2. When replacing the anode, the material on the old electrode should be stripped off, and the alumina powder on the residual electrode should be cleaned up.
3. Control the precipitation to prevent excessive precipitation and hardening of the precipitation.
4. The particle size of the alumina powder should be controlled well. It should not be too fine. When cutting, the anode sealing material should be reduced to fly, and the window should be closed during processing.
Only when all links are controlled within the required range and the external environment is also in line, can the flame retardant made of alumina micropowder have higher flame retardant performance.
Controls that should be done in the production of flame retardant with alumina powder
(Summary description)When using alumina to make flame retardants, not only the environment must meet the production requirements, but also other aspects must be controlled, so that better products can be made smoothly.
1. If clips are used in the process of making flame retardant with alumina powder, it is best to use strong acid and alkali resistant PP all plastic clips to avoid pollution caused by corrosion and oxidation of the clips.
2. When replacing the anode, the material on the old electrode should be stripped off, and the alumina powder on the residual electrode should be cleaned up.
3. Control the precipitation to prevent excessive precipitation and hardening of the precipitation.
4. The particle size of the alumina powder should be controlled well. It should not be too fine. When cutting, the anode sealing material should be reduced to fly, and the window should be closed during processing.
Only when all links are controlled within the required range and the external environment is also in line, can the flame retardant made of alumina micropowder have higher flame retardant performance.
- Categories:Industry News
- Author:
- Origin:
- Time of issue:2018-02-10
- Views:25
When using alumina to make flame retardants, not only the environment must meet the production requirements, but also other aspects must be controlled, so that better products can be made smoothly.
1. If clips are used in the process of making flame retardant with alumina powder, it is best to use strong acid and alkali resistant PP all plastic clips to avoid pollution caused by corrosion and oxidation of the clips.
2. When replacing the anode, the material on the old electrode should be stripped off, and the alumina powder on the residual electrode should be cleaned up.
3. Control the precipitation to prevent excessive precipitation and hardening of the precipitation.
4. The particle size of the alumina powder should be controlled well. It should not be too fine. When cutting, the anode sealing material should be reduced to fly, and the window should be closed during processing.
Only when all links are controlled within the required range and the external environment is also in line, can the flame retardant made of alumina micropowder have higher flame retardant performance.
Scan the QR code to read on your phone
Shandong Guoyu International Trade Co., Ltd.
Tel：+86-533-6215086
Fax：+86-533-6215085
E-mail：guoyumaoyi@126.com
Add: Block C, Xincheng Center, No. 179 Xincun West Road,
Zhangdian District, Zibo City, Shandong Province, China
Contact us by Wechat
COPYRIGHT © 2021 Shandong Guoyu International Trade Co., Ltd. All Rights Reserved Powered by:www.300.cn